This week was a little bit difficult as I am not very familiar with network communication, if programming was hard for me networking presented a far bigger challenge as it involves more conections and understanding. I started with the serial bus, milled and soldered correctly and proceeded to program, after a lot of error-1 I realized I had to hold the ftdi conection tight because it was not communicating propertly to the computer. With the help of Po Hao, Emma and Teja we could succesfully program the master and the slave boards but couldn´t get them to talk between them. We kept encountering the error 1 message and I suspect it is a matter of connections or soldering of the boards. We scheduled a meeting with Brian in order to try to solve this doubts and be able to better understand what is it that we did wrong.
Tough confusing week.